更多有关于 “ H3C 实验 ” 的文章，请点击这里。

实验环境：

操作系统：Windows 7 专业版（当时最新正式版），模拟器：HCL 2.1.1（当时最新版本）

• 路由器的型号是：H3C MSR36-20
• 交换机的型号是：H3C S5820V2-54QS-GE

实验需求：

• PC1 和 PC2 实际是两台路由器，使用路由器来模拟 PC ；
• 根据上图，在 PC1 和 PC2 的相应接口上配置相应的 IP 地址；
• 根据上图，在 SW1 和 SW2 的相应接口上配置 TRUNK 口，并划分 VLAN10 ；
• 最后，PC1 和 PC2 之间能相互 ping 通。

实验步骤：

本实验主要涉及到的命令是：IPv4 地址的配置、配置 TRUNK 口并划分 VLAN ，跟思科的命令大同小异，在此不做过多的描述。

PC1：

system-view
hostname PC1

int g 0/2
ip add 10.0.0.1 255.255.255.0
shutdown
undo shutdown

PC2：

system-view
hostname PC2

int g 0/2
ip add 10.0.0.2 255.255.255.0
shutdown
undo shutdown

SW1：

system-view
hostname SW1

vlan 10
port GigabitEthernet 1/0/2

int g 1/0/1
port link-type trunk
port trunk permit vlan 10

SW2：

system-view
hostname SW2

vlan 10
port GigabitEthernet 1/0/2

int g 1/0/1
port link-type trunk
port trunk permit vlan 10

如需清理 H3C 设备的配置，可使用如下命令：

<H3C>reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:Y
Configuration file in flash: is being cleared.
Please wait ...
MainBoard:
Configuration file is cleared.
<H3C>
<H3C>reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:N
This command will reboot the device. Continue? [Y/N]:Y
Now rebooting, please wait...

测试：

[PC1]ping 10.0.0.2
Ping 10.0.0.2 (10.0.0.2): 56 data bytes, press CTRL_C to break
56 bytes from 10.0.0.2: icmp_seq=0 ttl=255 time=6.000 ms
56 bytes from 10.0.0.2: icmp_seq=1 ttl=255 time=2.000 ms
56 bytes from 10.0.0.2: icmp_seq=2 ttl=255 time=3.000 ms
56 bytes from 10.0.0.2: icmp_seq=3 ttl=255 time=2.000 ms
56 bytes from 10.0.0.2: icmp_seq=4 ttl=255 time=2.000 ms

--- Ping statistics for 10.0.0.2 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 2.000/3.000/6.000/1.549 ms
[PC1]%May 22 16:01:14:029 2019 PC1 PING/6/PING_STATISTICS: Ping statistics for 10.0.0.2: 5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss, round-trip min/avg/max/std-dev = 2.000/3.000/6.000/1.549 ms.

[PC1]

[PC2]ping 10.0.0.1
Ping 10.0.0.1 (10.0.0.1): 56 data bytes, press CTRL_C to break
56 bytes from 10.0.0.1: icmp_seq=0 ttl=255 time=5.000 ms
56 bytes from 10.0.0.1: icmp_seq=1 ttl=255 time=9.000 ms
56 bytes from 10.0.0.1: icmp_seq=2 ttl=255 time=1.000 ms
56 bytes from 10.0.0.1: icmp_seq=3 ttl=255 time=2.000 ms
56 bytes from 10.0.0.1: icmp_seq=4 ttl=255 time=2.000 ms

--- Ping statistics for 10.0.0.1 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 1.000/3.800/9.000/2.926 ms
[PC2]%May 22 16:01:03:412 2019 PC2 PING/6/PING_STATISTICS: Ping statistics for 10.0.0.1: 5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss, round-trip min/avg/max/std-dev = 1.000/3.800/9.000/2.926 ms.

[PC2]

本文完。如有疑问，欢迎在下方留言；如本文有什么错误，欢迎在下方留言指正，谢谢。